Newsgroups: comp.parallel.pvm From: Vijay Tandra Sistla Subject: Re: PVM and Win95 Organization: University of Texas Arlington Date: Wed, 29 Oct 1997 13:40:29 -0600 Mime-Version: 1.0 Content-Type: multipart/alternative; boundary="------------C87D839C4AF8FCF303451EF6" Message-ID: <3457912D.ED7D2166@mecad.uta.edu> --------------C87D839C4AF8FCF303451EF6 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Jacques Dubeau wrote: > PVMers > > I am attempting to run the simple example programs issued with pvm3.3.10 > and pvm3.4 (beta) on Win95 machines. I have rsh running properly on all > machines. Network is ethernet. > > Here is what I get with 3.3.10: > I start the pvm console on host#1 and add host#2. Both hosts appear if I > type CONF. In another window I run the test program HELLO and I get the > response "i'm t4003", from host #1, as expected. I do not get the response > from host#2. It seems that HELLO_OTHER is not spawned. Other test > programs, such as MASTER and SLAVE produce no "visible" response from > the machines. > > With pvm3.4beta, from the console I get the message "console:exit handler > called" when I try to add host#2. > > ANy suggestions? I believe that the environment variables are set > correctly. > > Thanks in advance > > Jacques Dubeau Hi Jacques, I wonder how you could add hosts with the pvm for win32. I seem to have little or no success with pvm3.4 beta4 I get the message timed out from slave when master invokes slave. the slave responds to the invocation by master does not seem to accept the acknowledgement. I am using the rsh from Denicomp. Could you give me some input. Vijay. -- ************************************************************ Graduate Student, Department of Mechanical Engineering, University of Texas At Arlington, Arlington, TX 76019, USA Off Ph. 817-272-5256 817-272-2016 Res Ph. 817-860-7724 *********************************************************** --------------C87D839C4AF8FCF303451EF6 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit Jacques Dubeau wrote:
PVMers

I am attempting to run the simple example programs issued with pvm3.3.10
and pvm3.4 (beta) on Win95 machines. I have rsh running properly on all
machines. Network is ethernet.

Here is what I get with 3.3.10:
I start the pvm console on host#1 and add host#2. Both hosts appear if I
type CONF. In another window I run the test program HELLO and I get the
response "i'm t4003", from host #1, as expected. I do not get the response
from host#2. It seems that HELLO_OTHER is not spawned. Other test
programs, such as MASTER and SLAVE produce no "visible" response from
the machines.

With pvm3.4beta, from the console I get the message "console:exit handler
called" when I try to add host#2.

ANy suggestions? I believe that the environment variables are set
correctly.

Thanks in advance

Jacques Dubeau

 Hi Jacques,
 

    I wonder how you could add hosts with the pvm for win32.  I seem to have little or no success with pvm3.4 beta4
I get the message timed out  from slave when master invokes slave.  the slave responds to the invocation by
master does not seem to accept the acknowledgement.  I am using the rsh from Denicomp.

Could you give me some input.

Vijay. 

-- 
************************************************************
Graduate Student,
Department of Mechanical Engineering,
University of Texas At Arlington,
Arlington, TX 76019, USA
Off Ph. 817-272-5256
        817-272-2016
Res Ph. 817-860-7724
***********************************************************
  --------------C87D839C4AF8FCF303451EF6--