From: "B. Lee" <bslee@pvmcube4.snu.ac.kr>
Newsgroups: comp.parallel.pvm
Subject: Re: linux > nt adding hosts problems
Date: Sun, 23 Aug 1998 01:19:34 +0900
Organization: ETRI/Super Computer Center
Message-Id: <35DEEF96.5A55@pvmcube4.snu.ac.kr>
References: <35decd84.0@news.cgocable.net>
Reply-To: bslee@pvmcube4.snu.ac.kr
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit


Michael Gagnon wrote:
> 
> [ I've tried for at least a week to get this to work, so i wasn't begging to
> be stepped though it right away. =). ]
> 
> I have PVM3.4b6 running on NT, and PVM3.3.11 on linux.  They both work when
> a run them locally.   I also have a RSHd running on the NT box, checked that
> out.. works perfectly.
> 
> When i try to add the NT box from the linux box, this is what happens:
> 
> pvm> add "zaphod dx=C:\pvm3.4\lib\win32\pvmd3.exe"
> 0 successful
>                     HOST     DTID
> zaphod dx=C:\pvm3.4\lib\win32\pvmd3.exe Can't start pvmd
> 
> This occers after the NT box thinks for a few seconds.
> 
> Could someone please give me some easy step-by-step instructions on what I
> should do?  I'm no networking expert.
> 
working with 3.4 and version3.3.11 is impossible. Use the same version.
If you installed pvm3.3.11 version in both systems with proper rsh
daemon,
the instruction of your setting is correct.
But in my experience, pvm3.4 version on win95 machine has some problem
in adding
hosts which are linux systems. So I installed 3.3.11. 
3.3.11 version of win95/NT is not install shield version, but after
making directory and untar and unzip it, and set environment variables,
then you can make virtual machine successfully.

I construct virtual machine as one win95 machine, one winNT machine, a
linux system,
and a SGI origin 2000 with 4 processors, a CrayT3E with 128 PE's and a
CrayC90 with
16 processors. All pvm version's are PVM3.3.11 except crayT3E which has 
native pvm version (3.3.10)

Good luck.

---------------------------------
Bo-sung Lee
ETRI/Super Computer Center, Korea
e-mail : bslee@pvmcube4.snu.ac.kr
---------------------------------

