From: Dmitri Polivaev Newsgroups: comp.parallel.pvm Subject: Re: rsh under rshd (on NT 4.0) causes "Access denied" message only Date: Wed, 21 Apr 1999 16:03:39 +0200 Organization: [posted via] Leibniz-Rechenzentrum, Muenchen (Germany) Distribution: world Message-Id: References: <371C5662.16301240@physik.uni-muenchen.de> <371C86B7.5E56A150@mufasa.informatik.uni-mannheim.de> Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII In-Reply-To: <371C86B7.5E56A150@mufasa.informatik.uni-mannheim.de> Xref: ukc comp.parallel.pvm:8282 Hi, I tryed the recommended method: > a) make sure you don't have to specify a domain > b) use the administrator account > c) run the service in debug mode > and got no good results. 1. On the host hoppla (rsh worked under rshd -install) I could not get any directory listing under rshd -d 2. On the host r2d2 I could not get an access at all. I send you the full session protocols hoping to get some ideas about the reasons Attachments: 1. Protocol on host HOPPLA 2. Protocol on host r2d2 Protocol on host HOPPLA C:\PROGRA~1\NT-RSH~1>rshd -remove In OpenService Error number: 1060 C:\PROGRA~1\NT-RSH~1>configure -list administrator administrator ******** 129.187.132.54 End of file reached C:\PROGRA~1\NT-RSH~1>rshd -d Checking winsock.dll version... Creating socket... Binding socket... Listening on port 514... RSHD active. Accepting connection... C:\PROGRA~1\NT-RSH~1>rsh HOPPLA cmd /c cd c:\user (now output follows on the "rsh"-console) Client connected! Starting Thread for Program execution... Accepting connection... Thread started... Setting options on the main socket... Processing client data... Receiving... [1] ...got 5 chars. [1] stderr port: 1022 [1] stderr port read: 1022 [1] Local stderr port: 1021... Setting options on the stderr socket... Receiving... [1] ...got 47 chars. [1] Remote user name: Administrator [1] Local user name: Administrator Checking client... [1] Client port: 1023... [1] Client hostname: hoppla.krist.geo.uni-muenchen.de IpAddr: 129.187.132.54... Checking host credentials [1] Command: cmd /c dir c:\user Sending null byte result... error: LogonUser caused error: 1314 (?? it has worked well by rshd -install) Winsock error: Error number = 1314. Closing main socket... Closing stderr socket... Client disconnected... (skipped : [2] and [3] like [1]. and now:) C:\PROGRA~1\NT-RSH~1>rsh HOPPLA cmd /c dir c:\user Client connected! Starting Thread for Program execution... Accepting connection... Thread started... Setting options on the main socket... Processing client data... Receiving... [4] ...got 5 chars. [4] stderr port: 1022 [4] stderr port read: 1022 [4] Local stderr port: 1018... Setting options on the stderr socket... Receiving... [4] ...got 47 chars. [4] Remote user name: Administrator [4] Local user name: Administrator Checking client... [4] Client port: 1023... [4] Client hostname: hoppla.krist.geo.uni-muenchen.de IpAddr: 129.187.132.54... Checking host credentials Sorry, no match found (!!!!!!) [4] Command: cmd /c dir c:\user Sending null byte result... Closing main socket... Closing stderr socket... Client disconnected... C:\PROGRA~1\NT-RSH~1>rsh HOPPLA cmd /c dir c:\user Client connected! Starting Thread for Program execution... Accepting connection... Thread started... Setting options on the main socket... Processing client data... Receiving... [5] ...got 5 chars. [5] stderr port: 1022 [5] stderr port read: 1022 [5] Local stderr port: 1017... Setting options on the stderr socket... Receiving... [5] ...got 47 chars. [5] Remote user name: Administrator [5] Local user name: Administrator Checking client... [5] Client port: 1023... [5] Client hostname: hoppla.krist.geo.uni-muenchen.de IpAddr: 129.187.132.54... Checking host credentials [5] Command: cmd /c dir c:\user Sending null byte result... error: LogonUser caused error: 1314 Winsock error: Error number = 1314. Closing main socket... Closing stderr socket... Client disconnected... ^C (and now "normal") C:\PROGRA~1\NT-RSH~1>rshd -install Installing using C:\PROGRA~1\NT-RSH~1\rshd.exe Service installed and started. C:\PROGRA~1\NT-RSH~1>rsh HOPPLA cmd /c dir c:\user Datentrdger in Laufwerk C: hat keine Bezeichnung. Datentrdgernummer: 2474-BA86 Verzeichnis von c:\user 15.04.99 12:33 . 15.04.99 12:33 .. 15.03.99 21:35 allgemein (...............................................................skipped) 11 Datei(en) 0 Bytes 8.234.941.440 Bytes frei Protocol on r2d2 NT4.0 Workstation C:\PROGRA~1\NT-RSH~1>rshd -remove In OpenService Error number: 1060 C:\PROGRA~1\NT-RSH~1>configure -list vpm vpm ******** 129.187.132.119 End of file reached C:\PROGRA~1\NT-RSH~1>ping r2d2 PING wird ausgef|hrt f|r r2d2.krist.geo.uni-muenchen.de [129.187.132.119] mit 32 Bytes Daten: Antwort von 129.187.132.119: Bytes=32 Zeit<10ms TTL=128 Antwort von 129.187.132.119: Bytes=32 Zeit<10ms TTL=128 Antwort von 129.187.132.119: Bytes=32 Zeit<10ms TTL=128 Antwort von 129.187.132.119: Bytes=32 Zeit<10ms TTL=128 C:\PROGRA~1\NT-RSH~1>rshd -d Checking winsock.dll version... Creating socket... Binding socket... Listening on port 514... RSHD active. Accepting connection... C:\PROGRA~1\NT-RSH~1>rsh r2d2 cmd /c dir c:\user Access denied. Client connected! Starting Thread for Program execution... Accepting connection... Thread started... Setting options on the main socket... Processing client data... Receiving... [1] ...got 5 chars. [1] stderr port: 1022 [1] stderr port read: 1022 [1] Local stderr port: 1021... Setting options on the stderr socket... Receiving... [1] ...got 27 chars. [1] Remote user name: vpm [1] Local user name: vpm Checking client... [1] Client port: 1023... [1] Client hostname: r2d2.krist.geo.uni-muenchen.de IpAddr: 129.187.132.119... Checking host credentials Sorry, no match found (!!!!!) [1] Command: cmd /c dir c:\user Sending null byte result... Closing main socket... Closing stderr socket... Client disconnected... ^C C:\PROGRA~1\NT-RSH~1>