From: Markus Fischer Newsgroups: comp.parallel.pvm Subject: Re: rsh under rshd (on NT 4.0) causes "Access denied" message only Date: Thu, 22 Apr 1999 09:26:20 +0200 Organization: University of Mannheim Message-Id: <371ECF1C.2106CA56@mufasa.informatik.uni-mannheim.de> References: <371C5662.16301240@physik.uni-muenchen.de> <371C86B7.5E56A150@mufasa.informatik.uni-mannheim.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Xref: ukc comp.parallel.pvm:8287 Hi, you have to modify privileges in order to be allowed to debug a service. One more time I can say that you should look into the documents to see how this is done. Please also download the latest version since there was a bug in the rshd. Markus Dmitri Polivaev wrote: > Hi, > > I tryed the recommended method: > > > a) make sure you don't have to specify a domain > > b) use the administrator account > > c) run the service in debug mode > > > > and got no good results. > > 1. On the host hoppla (rsh worked under rshd -install) > I could not get any directory listing under rshd -d > > 2. On the host r2d2 > I could not get an access at all. > > I send you the full session protocols > hoping to get some ideas about the reasons > > Attachments: > > 1. Protocol on host HOPPLA > 2. Protocol on host r2d2 > > Protocol on host HOPPLA > > C:\PROGRA~1\NT-RSH~1>rshd -remove > In OpenService > Error number: 1060 > > C:\PROGRA~1\NT-RSH~1>configure -list > administrator administrator ******** 129.187.132.54 > End of file reached > > C:\PROGRA~1\NT-RSH~1>rshd -d > Checking winsock.dll version... > Creating socket... > Binding socket... > Listening on port 514... > RSHD active. > Accepting connection... > C:\PROGRA~1\NT-RSH~1>rsh HOPPLA cmd /c cd c:\user > (now output follows on the "rsh"-console) > Client connected! > Starting Thread for Program execution... > Accepting connection... > Thread started... > Setting options on the main socket... > Processing client data... > Receiving... > [1] ...got 5 chars. > [1] stderr port: 1022 > [1] stderr port read: 1022 > [1] Local stderr port: 1021... > Setting options on the stderr socket... > Receiving... > [1] ...got 47 chars. > [1] Remote user name: Administrator > [1] Local user name: Administrator > Checking client... > [1] Client port: 1023... > [1] Client hostname: hoppla.krist.geo.uni-muenchen.de IpAddr: > 129.187.132.54... > Checking host credentials > [1] Command: cmd /c dir c:\user > Sending null byte result... > error: LogonUser caused error: 1314 (?? it has worked well by > rshd -install) > Winsock error: Error number = 1314. > Closing main socket... > Closing stderr socket... > Client disconnected... > (skipped : [2] and [3] like [1]. and now:) > C:\PROGRA~1\NT-RSH~1>rsh HOPPLA cmd /c dir c:\user > Client connected! > Starting Thread for Program execution... > Accepting connection... > Thread started... > Setting options on the main socket... > Processing client data... > Receiving... > [4] ...got 5 chars. > [4] stderr port: 1022 > [4] stderr port read: 1022 > [4] Local stderr port: 1018... > Setting options on the stderr socket... > Receiving... > [4] ...got 47 chars. > [4] Remote user name: Administrator > [4] Local user name: Administrator > Checking client... > [4] Client port: 1023... > [4] Client hostname: hoppla.krist.geo.uni-muenchen.de IpAddr: > 129.187.132.54... > Checking host credentials > Sorry, no match found (!!!!!!) > [4] Command: cmd /c dir c:\user > Sending null byte result... > Closing main socket... > Closing stderr socket... > Client disconnected... > C:\PROGRA~1\NT-RSH~1>rsh HOPPLA cmd /c dir c:\user > Client connected! > Starting Thread for Program execution... > Accepting connection... > Thread started... > Setting options on the main socket... > Processing client data... > Receiving... > [5] ...got 5 chars. > [5] stderr port: 1022 > [5] stderr port read: 1022 > [5] Local stderr port: 1017... > Setting options on the stderr socket... > Receiving... > [5] ...got 47 chars. > [5] Remote user name: Administrator > [5] Local user name: Administrator > Checking client... > [5] Client port: 1023... > [5] Client hostname: hoppla.krist.geo.uni-muenchen.de IpAddr: > 129.187.132.54... > Checking host credentials > [5] Command: cmd /c dir c:\user > Sending null byte result... > error: LogonUser caused error: 1314 > Winsock error: Error number = 1314. > Closing main socket... > Closing stderr socket... > Client disconnected... > ^C > (and now "normal") > C:\PROGRA~1\NT-RSH~1>rshd -install > Installing using C:\PROGRA~1\NT-RSH~1\rshd.exe > Service installed and started. > > C:\PROGRA~1\NT-RSH~1>rsh HOPPLA cmd /c dir c:\user > Datentrdger in Laufwerk C: hat keine Bezeichnung. > Datentrdgernummer: 2474-BA86 > > Verzeichnis von c:\user > > 15.04.99 12:33 . > 15.04.99 12:33 .. > 15.03.99 21:35 allgemein > (...............................................................skipped) > 11 Datei(en) 0 Bytes > 8.234.941.440 Bytes frei > > Protocol on r2d2 NT4.0 Workstation > > C:\PROGRA~1\NT-RSH~1>rshd -remove > In OpenService > Error number: 1060 > > C:\PROGRA~1\NT-RSH~1>configure -list > vpm vpm ******** 129.187.132.119 > End of file reached > > C:\PROGRA~1\NT-RSH~1>ping r2d2 > > PING wird ausgef|hrt f|r r2d2.krist.geo.uni-muenchen.de [129.187.132.119] > mit 32 > Bytes Daten: > > Antwort von 129.187.132.119: Bytes=32 Zeit<10ms TTL=128 > Antwort von 129.187.132.119: Bytes=32 Zeit<10ms TTL=128 > Antwort von 129.187.132.119: Bytes=32 Zeit<10ms TTL=128 > Antwort von 129.187.132.119: Bytes=32 Zeit<10ms TTL=128 > > C:\PROGRA~1\NT-RSH~1>rshd -d > Checking winsock.dll version... > Creating socket... > Binding socket... > Listening on port 514... > RSHD active. > Accepting connection... > > C:\PROGRA~1\NT-RSH~1>rsh r2d2 cmd /c dir c:\user > Access denied. > > Client connected! > Starting Thread for Program execution... > Accepting connection... > Thread started... > Setting options on the main socket... > Processing client data... > Receiving... > [1] ...got 5 chars. > [1] stderr port: 1022 > [1] stderr port read: 1022 > [1] Local stderr port: 1021... > Setting options on the stderr socket... > Receiving... > [1] ...got 27 chars. > [1] Remote user name: vpm > [1] Local user name: vpm > Checking client... > [1] Client port: 1023... > [1] Client hostname: r2d2.krist.geo.uni-muenchen.de IpAddr: > 129.187.132.119... > Checking host credentials > Sorry, no match found (!!!!!) > [1] Command: cmd /c dir c:\user > Sending null byte result... > Closing main socket... > Closing stderr socket... > Client disconnected... > ^C > C:\PROGRA~1\NT-RSH~1> -- ------------------------------------------------------------------------------------ Dipl. Inf. Markus Fischer Tel.: +49 621 292-1621 University of Mannheim Fax: +49 621 292-5597 Computer Architecture email:mfischer@mufasa.informatik.uni-mannheim.de B6, 26 68159 Mannheim