Newsgroups: comp.sys.transputer From: Yong Li Subject: Re: B008 cards in an NT machine Organization: Transtech Parallel Systems Date: Mon, 05 May 1997 15:00:40 -0400 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <336E2E58.167EB0E7@transtech.com> Alan P. Burke wrote: > > I've tried anf failed but I believe that Elcom have a solution which > uses the B008drv installed by NT when it detects the board. > > Alan > > Dale Cass wrote: > > > > Has anyone tried using a B008 card in a machine running NT4.0. It just > > says that it cannot find the transputer. This works okay on Windows 95, > > windows 3.11 and DOS on a machine of the same make. > > > > _______________ > > Dale Cass |"The man who makes no mistakes does not > > dgcass@iee.org |usually make anything" Edward John Phelps check the location http://mecharea.me.su.oz.au/projects/transputer/default.htm please use the iserver from above location and user NT driver from the following location http://members.aol.com/impaachen/index.html. Please e-mail me if you need MORE info. ------------------------------------------------------------------------------- Yong Li ----------------------------- / Transtech ----------- Transtech Parallel Systems Corporation /_/ 20 Thornwood Drive /_/_/ Ithaca /_/ Parallel New York / Technology 14850-1263 USA email: yli@transtech.com Tel: (607) 257-6502 Fax: (607) 257-3980