From: haude@physnet.uni-hamburg.de (Daniel Haude) Newsgroups: comp.sys.transputer Subject: Thanks, folks -- and yet another question Date: 27 Oct 1998 11:13:53 GMT Organization: Hamburg University Message-Id: Reply-To: haude@physnet.uni-hamburg.de I wish to thank all the people wo helped me out with my transputer problem. With check.exe | mtest.exe I was able to figure out that for some reason the SIMM TRAM saw only four of the 16MB installed. I raided two older 8MB SIMMs from a PC, and they work fine with the transputer system. The other question: How can I configure the C004 switch on the B008 board? There is a binary file called "usernet" on my system that gets iserver'd onto the network to configure the links. The actual .btl code only loads after this file. The file came with the original software and I suppose it was generated with the "MMS toolset" that my B008 handbook mentions. Does this software happen to be freely available as well? --Daniel